295100972
Sea-Doo / Garmin Transducer
SKU: 295100972
Details
- Garmin's GT15M-IH In-Hull Mid-band CHIRP Transducer provides accurate depth readings even at high speed.
- Ideal for watercrafts that want to install the transducer inside a fiberglass hull and not on the transom.
- It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for watercrafts traveling at high speeds.
- In-Hull installation, no need to drill through the vessel; no drag.
- The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W.
Requires Garmin† ECHOMAP™ UHD2 9 SV GPS, UHD 72sv or 62cv GPS.
Choose your location
enter a zip or postal code

$339.99 USD
Easy installation except for reaching into the hull.
Hi there, thank you for your feedback! We're glad to hear that the installation was easy for you, we totally reaching into the hull can be a challenge. If you ever need any assistance with installation in the future, please don't hesitate to reach out to our customer service team. We're always here to help. Happy boating!
The installation- sea doo gtx - is a bit fiddle, mostly due to poor instructions. Some helpful info on YT, some not so much. Getting the cable from the head unit thru a "conduit" requires a fish tape and patience. Gluing the transducer mount to the hull requires waterproof 2 part epoxy or 3M Marine sealant. Allow a day or two for installation including wait time for epoxy to set and a leak test
Hi there! Thank you for your feedback on the Garmin GT15M-IH Transducer. We apologize for any inconvenience you experienced during installation and appreciate your patience in figuring it out. We will definitely take your comments into consideration and work to improve our instructions. Thank you for choosing Garmin!
No matter how hard I shove the cord into the back of the Garmin it does not connect to the transducer. There’s very little slack in the cables to plug into the Garmin.
Hi Eric, we're sorry to hear about the connection issues. Please contact us so we can assist you with a replacement or troubleshooting. Thank you for your feedback.
Easy installation except for reaching into the hull.
Hi there, thank you for your feedback! We're glad to hear that the installation was easy for you, we totally reaching into the hull can be a challenge. If you ever need any assistance with installation in the future, please don't hesitate to reach out to our customer service team. We're always here to help. Happy boating!
The installation- sea doo gtx - is a bit fiddle, mostly due to poor instructions. Some helpful info on YT, some not so much. Getting the cable from the head unit thru a "conduit" requires a fish tape and patience. Gluing the transducer mount to the hull requires waterproof 2 part epoxy or 3M Marine sealant. Allow a day or two for installation including wait time for epoxy to set and a leak test
Hi there! Thank you for your feedback on the Garmin GT15M-IH Transducer. We apologize for any inconvenience you experienced during installation and appreciate your patience in figuring it out. We will definitely take your comments into consideration and work to improve our instructions. Thank you for choosing Garmin!
No matter how hard I shove the cord into the back of the Garmin it does not connect to the transducer. There’s very little slack in the cables to plug into the Garmin.
Hi Eric, we're sorry to hear about the connection issues. Please contact us so we can assist you with a replacement or troubleshooting. Thank you for your feedback.